Our Mold Inspection Services
Mold Inspection w/ a Home Inspection
This option for a Mold Inspection is conducted in conjunction with a full home inspection and generally takes 30-60 minutes to perform. These can be done when there is already a known or suspected mold issue, or they can be performed as a precaution. Mold Inspection pricing with a home inspection starts at $325.00 and includes the following:
- Three total samples – one outdoor air sample as a control test, one indoor air sample, and one additional swab or air sample at the inspector or client’s discretion
- Indoor and outdoor temperature/humidity readings at the time of the inspection
- A written report that includes test conditions, test sample location(s), sample results, and recommendations for further action (if necessary)
- Additional samples, air or swab, can be done for an additional $125.00 per sample
- Swab samples are recommended in addition to the standard air samples when a known or suspected mold issue is found
Mold Inspection w/o a Home Inspection
Mold Inspections without a full home inspection are conducted as a stand-alone service and generally take 1.5-3.0 hours to perform. While Mold Inspections with a home inspection utilize information found during the home inspection to help determine the cause of the mold issue, a Mold Inspection without a home inspection requires more investigation while the technician is on-site. This pricing starts at $550.00 and includes the following:
- Three total samples – one outdoor air sample as a control test, one indoor air sample, and one additional swab or air sample at the inspector or client’s discretion
- Indoor and outdoor temperature/humidity readings at the time of the inspection
- A written report that includes test conditions, test sample locations, sample results, and recommendations for further action (if necessary)
- Additional samples, air or swab, can be done for an additional $125.00 per sample
- Swab samples are recommended in addition to the standard air sample when a known or suspected mold issue is found
- A visual inspection of the exterior and interior, including checking for odors that may indicate moisture damage and/or mold growth
- A visual inspection of the attic area(s) looking for signs of moisture intrusion from the exterior and air leakage issues/condensation from the interior
- A visual inspection of the heating, cooling, and ventilation systems for potential sources of concern
- Use of an infrared camera to help determine temperature anomalies that could lead to, or are caused by, moisture problems
- Use of a moisture meter at areas where temperature anomalies are found and/or areas of suspected or known moisture intrusion
Our Lead Mold Inspector, Thomas Kelsey, is a CertifiedMold Residential Mold Inspector
