YOUR AYLMER

HOME INSPECTION PROFESSIONALS

A short-term test is performed to determine the possible presence of elevated levels of radon gas pursuant to local regulations or practices for real estate transactions. Radon is an odorless, colorless and radioactive byproduct of natural soil decay known to increase the risk of cancer in those exposed.

A Termite Inspection (also referred to as a Wood Destroying Inspection or Wood Destroying Organism Inspection) includes a visual examination of the readily accessible areas of the home for evidence of wood-destroying insect activity such as termites, or carpenter ants or the visible damage caused by infestations.

Water testing services include taking a water sample following accepted protocols with analysis of samples performed by a certified lab. General options include a basic water Potability test for Coliform (bacteria) and other elements such as Nitrate/Nitrite, Hardness, Acidity (pH). Expanded testing options may include volatile organic compounds (fuels), heavy metals (lead, etc.) or other elements required or recommended by local authorities or common practice such as when a property is located in close proximity to agricultural land, mining, dry cleaning establishments, gas stations, industrial facilities, landfills, or other known or suspected local hazards exist.

What we inspect:  Inspection includes the visible (above water) pool and or spa elements including assessment of the physical condition of accessible decking, coping , walkways, and other surfaces. exposed electric and plumbing components, the filter and heater, if applicable. Watch us in action!

What we inspect: water flow of the interior drain system and area over the drainage field. Determine whether the water flows freely into the system from the house and readily apparent defects. Does not include inspection of buried or concealed components, soil testing, excavation of system components or opening or pumping of the tank.

A private on-site water supply (well) system inspection involves an inspection of visible interior pumps, piping, pressure and/or storage tanks and an assessment of the water flow (volume/pressure) from representative fixtures based on a representative water draw from plumbing fixtures. A well inspection does not include inspection of any buried or concealed components, determination of the water supply/source adequacy (yield or well capacity) or water quality.

Screening includes: Sample paint on surfaces inside and/or outside of the home following recognized protocol, certified lab analysis. Not intended to determine whether lead is a hazard; rather it determines whether sampled surfaces contain lead-based paint. Sampling can include bulk sampling or use of x-ray fluorescence equipment.

Screening includes: air and/or surface (bulk) sampling to determine presence of elevated levels of mold spores or verify presence of a mold growth.  Includes one air sample in one interior area and one outdoor control sample, with surface sampling of random or requested suspect mold growths. Processed by a qualified lab to determine results.

EIFS (Exterior Insulation Finishing System, also known as Synthetic Stucco) includes: a visual inspection of exterior areas and testing of one or more exterior walls to determine the type siding material, its condition, evidence of installation deficiencies, and where warranted, limited water intrusion testing using moisture meters and/or other devices.

Inspections include: draw inspection (verification of installed elements for lender release of funds); phase inspections (conducted at several stages of the construction process); and inspections of new homes ready for occupancy and assessment of the condition of installed components to supplement code compliance inspection provided by local authorities.

Inspections include: inspection of the visible and readily accessible areas of the roof, structure, mechanical and electric components of the public areas of a building, as well as all or representative individual dwelling or office/store units, as requested by the client.

This inspection involves: a review of the condition of the exterior and interior components of a home and the systems. Includes review of the roof, flashings, insulation issues, heating and air conditioning units, grading, the proper function of appliances and plumbing, electric components, smoke alarms for deferred maintenance and recommended action. 

A WETT inspection is an inspection of solid-fuel-burning fireplaces, stoves and other appliances conducted by an inspector trained and certified through programs conducted by the Wood Energy Technology Transfer, Inc. Includes inspection of all readily visible components of wood-burning fireplaces and appliances and connected chimneys to determine whether code compliant, installed correctly, properly maintained and safe. WETT inspections are often required in Canada in order to obtain homeowner insurance.

Wind mitigation inspections are conducted to identify whether construction features that have been shown to reduce losses in hurricanes, such as a roof framing connectors, gable end bracing, impact resistant windows, shutters and opening protection, and secondary water resistance barrier are present. Homes with wind mitigation reports indicating the presence of features to minimize wind damage can qualify for insurance discounts. Performed by individuals that meet training and certification requirements.

Tank scans identify the possible presence of a buried fuel tank or other components that may or may have contained fuel oil. Consists of a limited sweep of the surface (soil) area immediately surrounding a home or building using a type metal detector. Does not include probing, excavation, document or records search, sampling or testing of any tank, soil, water or other element or material.

Thermal imaging services make use of an infrared imaging camera that can detect the thermal energy (heat) emitted from an object. Thermal imaging measurements indicate temperature differentials that may help diagnose a myriad of potential concerns in a home or building such as heat loss or gain and waste leakage.